Ulefone Be Pro official update 20150805 rom

September 29, 2015, 4:46 am

≫ Next: AOSP 5.1 Pure Vanilla

$

0

0

Ulefone Be Pro official update 20150805

Step 1:Driver Installation   

Open Driver Auto Installer folder and Run Install.bat

Step 2: Update

1. Open One Key Flashing folder and Run SP_Facility_DL_Tool.exe

2. Turn off the phone, take out the battery, connect your phone to the PC via USB and press Scan button.

3. After N/A+COM(x) sign appear (look at the picture), disconnect your phone, press Star button and connect your phone again (Don’t forget to put the battery back to your phone).

4. Wait until Flashing Utility update your phone

5. If you want root and custom recovery use files from here http://www.needrom.com/download/root-ctr-recovery-lollipop-20150529/

---

AOSP 5.1 Pure Vanilla

September 30, 2015, 4:51 am

≫ Next: Star/Ulefone U5

≪ Previous: Ulefone Be Pro official update 20150805 rom

$

0

0

 

AOSP_5.1_Ulefone Be Touch 2_Pure Vanila

 

 

!!!!DISCLAIMER:Rooting your phone and using custom ROMS have risks,You may brick your Device if instructions not properly followed .I will not be responsible for any brick devices , It is always advisable to make a backup of your phone before proceeding ….Blah blah ……blah !!!!!  

 

 

 

 

 

Pre-requisite :

 

1. Rooted phone.

 

2. TWRP Recovery Installed

I have Only tested this on TWRP Recovery You may use CWM recovery and Flash the rom

 

 

 

INSTALLATION INSTRUCTIONS

 

   Download Rom and copy to Sd card

Reboot into TWRP Recovery

Go to Wipe Option in TWRP

Go to  Advanced Format option

Choose cache ,Data ,Sytem and Dalvik cache partition and swipe for Formatting.

Flash ROM = wait until finish

First time boot after flashing take time ..please be Patient

 

All Done enjoy!!

Features :

Pure Vanila Build, No Bloatware.

AOSP 5.1 based 

Smooth .

Dolby ATMOS source code infused 

 

Known Bug 

Fingerprint Support not there ..

 

Star/Ulefone U5

October 2, 2015, 4:08 pm

≫ Next: MIUI 7 v5.9.17

≪ Previous: AOSP 5.1 Pure Vanilla

$

0

0

ROM Mobiles STAR/ULEFONE U5  – ROM Android 4.2.2

ONLY MT6582

Update Official ROM STAR – ULEFONE U5 version: 109v82_gq3016_20150106

Changelog

SelectShow>

20150106 xieshengtao Meeting top support small windows, off screen gestures Update the system default time (2015.01.01) 20141224 xieshengtao Wireless Upgrade GPS test problem 20141216 xieshengtao Clock widget display issue 20141208 xieshengtao Caller ID function is canceled Foreign ownership Compatible distance sensor Key issues 20141119 xieshengtao 5648 far-focus blur and greenish integration issues HLY_546HX_917D screen flash problem 20141029 xieshengtao Optimization HLY_546HX_917D (20141027 code) 5648 afocal ambiguity 20141016 xieshengtao Canton News Lishen Battery 4.35v Optimization HLY_546HX_917D Screen W551491AAA problem 20141014 xieshengtao 5648 and 8865 afocal ambiguity 20141010 xieshengtao Add screen driver: HLY_546HX_917D 20140917 xieshengtao Update platform issues / add drive 20140808 xieshengtao Add screen: RX_60HX_776A 20140731 xieshengtao Samsung E2109-GQ3016 project solve 4E1 camera solve afocal, ghosting problem Optimization ov8865_mipi_raw 20140721 xieshengtao Optimized Desktop icon Map error problem Optimization s5k4e1mipi_raw Add ov8865_mipi_raw 20140704 xieshengtao Li Jia add webcam Add Wan Changlong screen driver 20140617 xieshengtao Battery Parameter Problem 20140610 xieshengtao When open zero-delay camera mosaic problem solving Preview Resolve before and after the camera is switched screen flash problem Open T card exchange function On Google search shortcut Shift

 

———————————————————————————————————————————–

Official ROM STAR – ULEFONE U5 version: 109_v82_gq3016_20140424

Gapps include –  No Rooted

Language support: Multilang

 

Install ROM :

- Unpack FlashTools, and Click on Flash_tool.exe
- Select a the MT6582_Android_scatter_emmc.txt in ROM
- Wait file to be added into Flash Tool
- choose Option->USB Model,click USB Model
   –> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
- Turn off your phone, remove the battery.

- "Press F9 (hit Download button)" OR " if upgrade ROM Firmware->Upgrade "
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !

- You can now safely disconnect your phone and turn it on.

MIUI 7 v5.9.17

October 4, 2015, 5:29 pm

≫ Next: MIUIsic 7_lollipop_5.0_beta4_ 5.9.18 Ulefone Be touch 2

≪ Previous: Star/Ulefone U5

$

0

0

Please Note

   ●  This is a Beta Release you may expereince some bugs during you usage.
   ●  You need to have TWRP Recovery Installed

             

CLEAN SYSTEM INSTALLATION INSTRUCTIONS

   ● Download Rom and copy to Sd card
   ● Reboot into TWRP Recovery
   ● Go to Wipe Option in TWRP
   ● Go to  [Advanced Format] option
   ● Choose [Cache, Data, Sytem, Dalvik cache] and swipe for Formatting.
   ● Install ROM
   ● First time boot take some time…please be Patient

 

UPDATE MIUI6 to MIUI7 INSTRUCTIONS

   ● Download Rom and copy to Sd card
   ● Reboot into TWRP Recovery
   ● Install ROM
   ● Press [Wipe Cache, Dalvik Cache] button in TWRP
   ● Restart & enjoy!

 

07-10-2015 ADDED UPDATE TO FIX SOME BUGS

Include fixes for repair Tethering, WiFi Mac address, MTP bugs.
Install via TWRP file "FIX_MIUI7_BE_X_THRACIAN_071015.ZIP"

MIUIsic 7_lollipop_5.0_beta4_ 5.9.18 Ulefone Be touch 2

October 5, 2015, 9:39 am

≫ Next: [PATCH] StageFright [LP 5.1] [MT6752]

≪ Previous: MIUI 7 v5.9.17

$

0

0

 

!!!!DISCLAIMER:Rooting your phone and using custom ROMS have risks,You may brick your Device if instructions not properly followed .I will not be responsible for any brick devices , It is always advisable to make a backup of your phone before proceeding ….Blah blah ……blah !!!!!  

 

Pre-requisite :

 

1. Rooted phone.

 

2. TWRP Recovery Installed

I have Only tested this on TWRP Recovery You may use CWM recovery and Flash the rom

INSTALLATION INSTRUCTIONS

 

                                                               Download Rom and copy to Sd card

Reboot into TWRP Recovery

Go to Wipe Option in TWRP

Go to  Advanced Format option

Choose cache ,Data ,Sytem and Dalvik cache partition and swipe for Formatting.

Flash ROM = wait until finish

First time boot after flashing take time ..please be Patient

 

All Done enjoy!!

 

Basic GAPPS Flash Tutorial

1. After first boot reboot your phone to recovery again.

2. Select [install zip from sdcard] → [choose zip from sdcard]→ [XXX-GAPPS.zip] → [YES]

3. Wait flash finished, press Back and select reboot system now [], the  phone going to automatically restart with installed GAPPS.

4.Set up your Google and Xiaomi Accounts(for themes).

Working :

Wifi , Camera (fixed). Bluetooth ,all other basic functions

Known Bugs:

Mi Video Player Video Freezes audio continues ( Fixed In this Verson 5.9.18 Beta 4)

solutiom :Alternate Video Player included.

Video Camera -Not saving the video you may use other camera apps for shooting video and save them .(Fixed In this Version 5.9.18 Beta 4)

 

Tweaks:

 

Android Keyboard included.

Now All Sony Apps Ported -Infused into Rom code 

ScreenShots

 

                              

 

 

 

 

This is next version of my previous ported MIUI 7 . I have managed to fix bugs highlighted in my previous  rom .This time I  worked on for music Lovers to infuse the Sony's Best Music and Multimedia apps including Keyboard , I personly thank to XDA Develpoer member Ibanz7 to port the sony apps for lollipop 5.x version , I used his ported apps to infuse in my MIUI 7 Rom . it took lot of efforts as MIUI is so sensitive , I played with Lib files and finally I have done it sucessfully after spending hours as MIUI is sensitive it gets bricked if you play with Lib files ,I also broked my micro Usb during testing , Please support me for further develpoment if you like the rom

 

I named it as

 

MIUIsic 7_lollipop_5.0_beta4_ 5.9.18 Ulefone Be touch 2

 

 

 

 

All the previous bugs have been fixed there might be issue as this is still beta .

Basic function are working .

 

 

 

[PATCH] StageFright [LP 5.1] [MT6752]

October 8, 2015, 6:56 am

≫ Next: Miui 7 v5.10.22

≪ Previous: MIUIsic 7_lollipop_5.0_beta4_ 5.9.18 Ulefone Be touch 2

$

0

0

                                                                                   

Confirmed working on the following MT6752 SoC Devices

• Jiayu S3
• iOcean Rock MT6752
• ZOPO ZP920
• Lenovo K3 Note
• Ulefone BT2
• Elephone P7000

Which stagefright bugs are patched by this ?


ALL the present StageFright known bugs are patched 

• CVE-2015-1538
• CVE-2015-1539
• CVE-2015-3824
• CVE-2015-3827
• CVE-2015-3828
• CVE-2015-3829
• CVE-2015-3864

How can i check If im vulnerable ?


Download the Stagefright Detector by: Zimperium INC


–> Play Store

After Patching, should be like this:

How to install?

• Make a backup first (just in case) …
• You'll need a custom recovery for LP (TWRP / CWM , etc)
• Just flash the JiayuS3_Stagefright_LP5.1_fix_v3.zip
• Reboot

​For other devices that don't use the mmcblk0p17 as /system partition:


The flash may fail, if that's your case, simply extract all the files, and push via adb to your device.





This was (of course ) compiled from source …

ChangeLogs:

Build v3

• Fix Video dec / enc issues
• Fix: Other small issues related to MTK's OMX

Build v2

• Youtube Videos Decoding, now working
• MxPlayer / VLC , etc will decode videos (SW only), HW is still Broken

Build v1

• Initial build

Iam not a developer!

​Thanks to:

• Zimperium for finding the exploits
• CyanogenMod, for providing the commits

Superdragonpt for compiling it 

• DerTeufel1980 & Jiayu Deutschland, for all the help

Miui 7 v5.10.22

October 9, 2015, 8:59 am

≫ Next: MIUI Pro 7 Ulefone Be Touch 2 (Multilingual)

≪ Previous: [PATCH] StageFright [LP 5.1] [MT6752]

$

0

0

MUSTREADTHIS FIRST BEFORE FLASHING ORDOWNLOADING!!! BACKUPFIRST!Especiallyyour NVRAM or IMEI. This is onbeta stage soexpectsome minor bugs.

 

 

• -MIUI 7 (Kitkat Android 4.4.2)

• - Lite Mode

• - Google Apps included

• -Busybox Installed

• Deodexed

• Zipalign

• Quickboot Installed

• FX File Explorer Installed with Root Add-On

• Titanium Back-Up Pro v7.2.0 Installed

• Greenify v2.6.1 Installed

• Screen-Off Installed

• WSM Tools Installed
• XInternalSD Installed (to swap external storage to internal storage)
•  

 

 

ROMFlashingInstructions: Using CTR v3.0

1. Boot to Recovery Mode.
2. Tap Wipe Menu
3. Tap Wipe Data-Factory Reset
4. Tap Wipe Cache
5. Tap Wipe Dalvik-Cache
6. Install Miui 7 5.10.22.zip
7. Reboot.

 

MIUI Pro 7 Ulefone Be Touch 2 (Multilingual)

October 10, 2015, 3:31 pm

≫ Next: Stock ROM (14 October update)

≪ Previous: Miui 7 v5.10.22

$

0

0

!!!!DISCLAIMER:Rooting your phone and using custom ROMS have risks,You may brick your Device if instructions not properly followed .I will not be responsible for any brick devices , It is always advisable to make a backup of your phone before proceeding ….Blah blah ……blah !!!!!  

 

 

This is next version of MIUI 7 called MIUIpro. It has many languages 

MiuiPro MIUI V7 5.10.2 based on android 5.0.2 ( Mulltilingual).

I did not have enough time to test but few days usage. I feel it is good for daily use . 

DONT Try to install super user it will break the MIUI ,

To Gain Root – you need to manually assign permission – Go To security ( Icon on the front)> Permission >

Root > assign Permission manually , 

 

what works .

About Build – This has been ported from P7000 So all the bugs in ported rom chosen will remain the same, I find it smooth and stable . 

No Bloatware.

Multiple langauge support 

Camera working , Bluetooth, wifi working,sensors working .

Gapps included.

Not Implemented 

Fingerprint support.

All the Credit goes to Miui Pro Team and actual develoer of the rom , I have just ported 

                                                             Installation

                                                           ===========

                                                Download Rom and copy to Sd card

Reboot into TWRP Recovery

Go to Wipe Option in TWRP

Go to  Advanced Format option

Choose cache ,Data ,Sytem and Dalvik cache partition and swipe for Formatting.

Flash ROM = wait until finish

First time boot after flashing take time ..please be Patient 15 -20 minutes

 

All Done enjoy!!

 

 

 

 

 

---

Stock ROM (14 October update)

October 14, 2015, 7:27 am

≫ Next: Ulefone Be Touch 2

≪ Previous: MIUI Pro 7 Ulefone Be Touch 2 (Multilingual)

$

0

0

Changelog is same as before, this one apparently fixes battery drain and the fingerprint sensor. WiFi issues should also be fixed. Touchscreen is more responsive, but still lags when fast input is given.

ROM adds: U Launcher, U Browser. I'll highly recommend disabling the U Browser, as it pushes ads.

 

Observed changes:

• Significantly laggier first boot (goes away after some time)
• Fingerprint sensor works faster, but sometimes does not work at all
• Flicking using the touchscreen is now possible, but not at the maximum speed

 

Please remember to unroot, and undo any modifications before flashing, or you'll end up with a bootloop. Only flash this over an unmodified 0811 or 0829 ROM, or you'll get an error while flashing. If you need to reflash from stock, run the OTA twice. 

 

NOTE: Please stop sending me private messages asking me how to flash your device. The comments section is there for a reason. 

Ulefone Be Touch 2

October 22, 2015, 10:00 am

≫ Next: Ulefone Be Pro – ROM LP 5.0 v. 05.08.2015

≪ Previous: Stock ROM (14 October update)

$

0

0

ROM Mobile Ulefone Be Touch 2 – ROM Android 5.1(5.0)

ONLY MT6752

Update Official ROM Ulefone Be Touch 2 Version: Ulefone_be touch 2_20151021 – c218v13_gq3022_fhd_3m_ulefone – 5.0 LRX21M

——————————————————————————————————————————————————————————-

Update Official ROM Ulefone Be Touch 2 Version: Ulefone_be touch 2_20151012 – c218v13_gq3022_fhd_3m_ulefone – 5.0 LRX21M

——————————————————————————————————————————————————————————-

Official ROM Ulefone Be Touch 2 Version: Ulefone_be touch 2_20150928 – c218v13_gq3022_fhd_3m_ulefone – 5.0 LRX21M

Gapps include -  No Rooted

Language support : Multilang

 

Install ROM :

- Unpack FlashTools, and Click on Flash_tool.exe
- Select "scatter-Loading" and search MT6752_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
- Select "Download Only" or if upgrade "Firmware upgrade"
- Turn off your phone, remove the battery (if the battery is removable) and replace it after some seconds (and don't turn on the phone).

- Press “Download” button to start
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !

- You can now safely disconnect your phone and turn it on.

Ulefone Be Pro – ROM LP 5.0 v. 05.08.2015

October 31, 2015, 10:31 am

≫ Next: Ulefone Paris

≪ Previous: Ulefone Be Touch 2

$

0

0

Categories: This the current last stock ROM version for Ulefone Be Pro (Android 5.0 v. 05.08.2015). This is the standard ROM with standard boot.img plus into the zip two additional folder with files boot.img-unlockd – boot.img+scatter file – to load via Flashtool (DOWNLOAD ONLY mode) a pre-rooted boot.img boot.img-stock – boot.img+scatter file – to load it [...] (Read more...)

Ulefone Paris

October 31, 2015, 3:14 pm

≫ Next: Ulefone Paris – TWRP recovery 2.8.7.0

≪ Previous: Ulefone Be Pro – ROM LP 5.0 v. 05.08.2015

$

0

0

Categories: Install it through "SP Flash Tool", and you'll can root your phone through recovery. (Read more...)

Ulefone Paris – TWRP recovery 2.8.7.0

November 1, 2015, 5:47 am

≫ Next: CRYSTALROM(V3 is out)

≪ Previous: Ulefone Paris

$

0

0

Categories: Ulefone Paris TWRP recovery (for Android 5.x) version 2.8.7.0 by hanuma (Read more...)

CRYSTALROM(V3 is out)

November 1, 2015, 6:30 am

≫ Next: Ulefone Paris

≪ Previous: Ulefone Paris – TWRP recovery 2.8.7.0

$

0

0

CRYSTALROM 

 V1 – The latest version

Changes:

V1

• Date: 03/08/15
• Weight: 489 MB
• Basis: The July Firmware
• Integrated Ruth (SuperSU version 2.46)
• Integrated RootExplorer
• Framework-res from edik-skv
• Dpi = 380
• By default, english language and Moscow time (GMT +3)
• Fixed configuration for correct display of the operator YOTA
• Remove debris
• Build 20150803_2210
   

Changes SuperLite (compared to version):

• V1 Weight: 391 MB
• Removed GAPPS, and other unnecessary stuff
   

V2

• Updated to version 2.49 supersu
• Deodex app and priv-app
• Tweaks and build.prop default.prop (details will not paint)
• From the nucleus removed tweaks to link (tcp_buffer), may be better to work
• Corrected powerprofile system
• I replaced the stock browser Other stock
• Clean debris from​

 

Versions (V2):

1. Normal with the stock kernel
2. Usually I modified the kernel ( related link)
3. Light with the stock kernel
4. Light me with a modified kernel ( related link)

 

V3

• The new base
• Improved camera performance (less lag image, faster focus)
• Added the update over the air
• Optimizing battery consumption (sysctl, power profile)
• Optimizing performance (plus graphics)
• Fix hanging calls
• Multiple optimization firmware

Ulefone Paris

November 1, 2015, 9:22 am

≫ Next: FUNTOUCH OS 2.1- ULEFONE BE TOUCH 2 Lollipop 5.0

≪ Previous: CRYSTALROM(V3 is out)

$

0

0

Categories: Install it with SP Flash Tool and you'll have the new version of official firmware, or to solve brick problem. (Read more...)

---

FUNTOUCH OS 2.1- ULEFONE BE TOUCH 2 Lollipop 5.0

November 7, 2015, 5:23 am

≫ Next: Ulefone Paris

≪ Previous: Ulefone Paris

$

0

0

[[ROM][PORT][ LOLLIPOP 5.0]- [2.1] FUNTOUCH OS 2.1- ULEFONE BE TOUCH 2

This is yet another Port by me for Ulefone Be Tocuh 2 , This is ported from Vivo X5 Pro D

*************** Please take a Backup before proceeding ***********************

!!!!DISCLAIMER:Rooting your phone and using custom ROMS have risks, You may brick your Device if instructions not properly followed .I will not be responsible for any brick devices , It is always advisable to make a backup of your phone before proceeding ….Blah blah ……blah !!!!! 

KEY FEATURES OF ROM 

• Smooth and Good looking 
• New UI with new features 
• Smooth Touch , Fast . Battery Saver 
• Optimization done with L Speed 3.0 ( Credits goes to XDA LSpeed Developers and team @skyinfo @F4uzan,@aidasaidas75 @skyinfo@Maltonator @k1ks @slaid480 @ArjunrambZ @pizza_dox @k1ks @Plamb1r @SecDet @Exit_Only,@ansebovi- Thanks to their efforts .
• Firmware changed with TCL M2M Phone (excluding Modem)
• Modem Changed to Sony C4 ( no more wifi and connection drop problem)
• Good Camera UI with beauty and other features 
• Chinese and English Language only.
• All Bloatware removed 
• Antutu Score 45000+
• Music Player and Sound improved 
 

Bugs – Error message while connecting phone to laptop /PC with SD storage mounted “ Vivo service stopped . Click ok and Rom works as normal , if you want to go any other mode click ok fast and switch to other USB mode fast .
Not completed – Finger Sensor Support ..I have decoded the code but needs guidance to recompile and infuse help needed from senior developers. If anyone wants to help please PM me. 
 

INSTRUCTIONS:

1. Download Rom and copy to Sd card
2. Reboot into TWRP Recovery
3. Go to Wipe Option in TWRP
4. Go to Advanced Format option
5. Choose cache ,Data ,System and Dalvik cache partition and swipe for Formatting.
6. Flash ROM = wait until finish
7. First time boot after flashing takes time ..please be Patient
Note :::: Please Do NOT Auto Update .Vivo Will try to push update for its Vivo Phone thinking that it is Vivo X5 Pro .. but It is not :

GAPPS INSTRUCTIONS:

Please use only GAPPS given in the thread any other GAPPS will not work due to limitation in the system partition which Mr Ulefone created small size of System Partition .If you encounter Google Play service error after flashing GAPPs Run the APK given .Install Gapps after Flashing the ROM if service error ..Install the Google Service APK

L-Speed Installation:

1.Download  L_SPEED_V3.2_OVERSEER_arm and copy to Sd card

2. Reboot into TWRP Recovery

3. Go to Wipe Option in TWRP

4. Go to Advanced Format option

5. Choose cache ,Dalvik cache partition and swipe 

You may see the noticible difference after installation the package , Please Convey Thnaks to develpoers who were part of the project for lollipop 5.0 .

 

 

 

DOWNLOADS

GAPPS

needrom

Google Service
UPLOADING…….

Attached Thumbnails

           

follow -http://forum.xda-developers.com/android/development/rom-funtouch-os-2-1-beta3-ulefone-touch-t3243043/post63700913#post63700913

Ulefone Paris

November 7, 2015, 7:45 am

≫ Next: Ulefone Paris

≪ Previous: FUNTOUCH OS 2.1- ULEFONE BE TOUCH 2 Lollipop 5.0

$

0

0

Categories: Install it with SP Flash Tool and you'll have the new version of official firmware, or to solve brick problem. (Read more...)

Ulefone Paris

November 25, 2015, 2:11 pm

≫ Next: Stock Rom October 2015 Update (Option 2)

≪ Previous: Ulefone Paris

$

0

0

Categories: Install it with SP Flash Tool and you'll have the new version of official firmware, or to solve brick problem. (Read more...)

Stock Rom October 2015 Update (Option 2)

November 29, 2015, 10:36 am

≫ Next: Ulefone Paris

≪ Previous: Ulefone Paris

$

0

0

If other Be Touch 2 ROMs just give a green or pink screen on your phone, try this "option 2 ROM" which has a different graphics driver.

 

It is available via a link on Ulefone's website but I lost count of the number of times my download failed before I eventually managed to get a copy. So I'm uploading it here to help anyone who finds themselves with the same problem.

 

Android version 5.1

Kernel 3.10.61

 

Please note: since there are two versions of the phone which need different ROMs, please do not vote this down if it does not work for you. Use an option 1 ROM instead, such as the ones from s7yler.

 

Instructions:

I assume that you already have the relevant COM port drivers installed. If not, get them first. Back up any data you want to keep.

Extract the .rar file to its own folder.

Run SP_Facility_DL_Tool.exe

Take the back off the phone and remove battery, SIM card and memory card

Click "Scan"

Connect the phone via its USB cable to your computer (this is done after the above step so that Windows drivers do not auto load and get in the way)

If the scan succeeds in finding the right COM port, proceed to the next stage. If not, scan again.

Unplug the phone from the USB port. Insert the battery into the phone but leave everything else off.

Click "Start"

Plug the phone's USB cable into the computer again (this is done after the above step so that Windows drivers do not auto load and get in the way)

Progress bar should start to move in a few seconds. Wait until progress bar is at 100%.

Flash complete. Disconnect the USB cable, put everything back in your phone and power it on. It takes a long time to get past the splash screen first time around.

Ulefone Paris

December 3, 2015, 2:06 pm

≫ Next: MIUI 7 v5.9.17

≪ Previous: Stock Rom October 2015 Update (Option 2)

$

0

0

Categories: Ulefone Paris Android : 5.1 Original stock FIRMWARE 23/11/2015 (Read more...)